|
|
|
PRODUCTS - Tap Garage
The Croci system for garage doors elegantly replaces any problems closing of garages and/or stores, with an operation that can provide an easy and secure closure, in step with the Croci range of rolling shutters.
TAP GARAGE offers an aluminium profile with ecological polyurethane foam insulation, also available with "tap security" and with intermediate profiles in extruded aluminum- for lighting and venting. TAP GARAGE is available in the same colors of the color range.
Tap Garage can be installed with the following systems:
- Ceiling (NEW now available also manual version)
- Shutter box
- Support to wall
Thanks to its ability to slide on horizontal guide rails supplied with plugs with rollers, this system takes up less room, which is suitable for low-ceiling houses. Its motorized operation uses a particular compensation spring system and is also supplied with manual lifting.
 |
CEILING SYSTEM
(Motorized or Manual version) Opening sizes (max)
Width 3,5 lm
Height 3 lm
Surface 9m2
Opening sizes (min)
Width 2 lm
Height 2 lm
|
The system, sliding in horizontal guide rails and provided with special side plugs with rolls, offers a minimal overall dimension and makes the use easier in case of low ceilings. Moreover, thanks to a special assist springs system, the motor operation can be provided with inside and outside (on request) manual emergency release. |
This system is extremely easy to be assembled. Moreover, it is an independent system, which means that it respects the architectural features of the place where it is assembled, giving it a certain elegance.
 |
SHUTTER BOX SYSTEM
(Motorized)
Opening sizes (max)
Width 4 lm
Height 2,6 lm
Surface 10 m2
|
This system allows an excellent esthetical solution, a greatest ease in the assembly and it can be adapted to several situations, as it is an independent system. |
This system may be used to close larger surfaces (till 16 m2) and it assure you the same features of the previous systems.
 |
SUPPORT TO WALL SYSTEM
(Motorized)
Opening sizes (max)
Width 5 lm *
Height 5 lm
Surface 16 m2
* More than 4 lm only SAR/177 with anti-storm inserts
|
This system allows the closure of a surface of 16 m2. |
Along with the large range of accessories, the Croci product for doors and garages allows adaptation to different “dimension fit” solutions- always according to the regulations enforced.
|
AR/77 ALUMINIUM PROFILE
WITH POLYURETHANE
18,5X77 mm
Weight per m2 Kg.4,730 approx.
Slats per m2 n. 13
Max. width 5,00 lm
Max. height 5,00 lm
Max. surface 16 m2 |
|
|
|
|
SAR/177 ALUMINIUM PROFILE
18,5X77 mm
Weight per m2 Kg. 7,630 approx.
Slats per m2 n. 13
Max. width 6,00 lm
Max. height 6,00 lm
Max. surface 20 m2 |
|
|
|
|
ESF/77 INTERMEDIATE PROFILE IN EXTRUDED ALUMINIUM
FOR LIGHTING
Weight per m2 Kg. 10,860 approx.
Slats per m2 n. 13,00 |
|
|
|
|
ESA/77 INTERMEDIATE PROFILE IN EXTRUDED ALUMINIUM
FOR VENTILATION
Weight per m2 Kg.9,520 approx.
Slats per m2 n. 13 |
|
|
|
|
TE19X77 END SLAT IN EXTRUDED ALUMINIUM
WITH SEAT FOR KEY LOCK AND PVC GASKET
Weight per m2 Kg. 0,999 approx. |
|
|
|
|
GE90X35 GUIDE RAIL IN EXTRUDED ALUMINIUM
WITH SEAT FOR PVC GASKETS,
for 19 mm profiles
Weight per m2 Kg. 1,890 approx.. |
|
|
|
|
GE85X38 GUIDE RAIL IN EXTRUDED ALUMINIUM
WITH DOUBLE SEAT FOR BRUSH GASKET
for 19 mm profiles
Weight per lm Kg. 1,938 approx. |
|
|
|
|
PROTECTIVE GUARD
IN EXTRUDED ALUMINIUM FOR GUIDE RAILS GE85X38 |
|
|
|
|
|
|
ANTI-FALLING APPLIANCE
The ANTI-FALLING APPLIANCE prevents the free fall of the rolling shutter in case of anomalies. |
|
|
|
|
| The air pressure safety-edge, photocells or the safety-edge, with an infrared ray, stop the door in case it finds an obstacle on its way down. |
|
|
|
|
|
|
