|
|
|
PRODUCTS – Security accessories
 |
According to an information source of the italian research institute, 50% of burglaries happen
through windows. in fact, most of them are committed by occasional thieves not prepared to
face obstacles and accidents. Aluminum and steel rolling shutters discourage thieves from
entering your home, thanks above all to their breaking strength.
moreover there is a wide range of security accessories that can be installed in several parts of
the rolling shutters to avoid its enrolling, thus increasing thefts prevention.
Locking systems end slats
Locking system intermediate
Locking system automatic anti-lifting system
|
| Locking systems end slats |
Up ^ |
 |
ALUMINIUM OR STEEL SECURITY LATCH
composed of a specially formed aluminum or steel bar and of a PVc anti-slide handle. fixed on
end slats 7x56 et 14x56 (except universal type) without any further processing, due to the particular
form of the end slat. it is manually activated and, when it is introduced into the wall and into
the lateral guide rails, it avoids the bottom of the rolling shutter from lifting. Also available in
models for intermediate profiles (suggested for te12x55 profile). |
 |
STEEL-REINFORCED SECURITY LATCH
composed of a steel bar locking handle, fixed on the 14x56 end slat (standard – exterior rolling –
universal) which has been specially worked. it is manually activated and, when inserted into the
wall and into the lateral guide rails, it avoids the bottom of the rolling shutter from lifting. |
 |
KEY LOCK
the thumb lock (with knob) can be activated from the inside, whereas the key lock can be activated
both from the inside and the outside. it is fixed on the 14x56 end slat (except the universal
type). it is composed of two aluminum bars inserted first into the guide rails and then into the
wall, which prevents any shutter rising. |
| Locking system intermediate |
Up ^ |
 |
INTERMEDIATE STEEL LOCKING SYSTEM
it is fixed on a profile slat (with special working) at the required rolling shutter height. it can be
used for 53 mm and 55 mm profiles (sAr/112, sAr/132, Ar/33, sAr/133, Ar/12 and Ar/32). it is
manually activated and, when inserted into the wall and into the lateral guide rails, it avoids the
bottom of the rolling shutter from lifting. |
| Locking system automatic anti-lifting system |
Up ^ |
 |
it is available in different versions for 7,5 – 9 mm and 12 – 14 mm profiles. it is fixed on the roll
tube and on the upper rolling shutter profile (every 50 cm) and it can be used both with crank and
motor operations. it activates automatically when the shutter is pulled down and it applies a
pressure which avoids the bottom of the rolling shutter from lifting. |
|
