| |
 |
|
 |
According to an information source of the
Italian Research Institute, 50% of all break-ins happen
through the windows. Most are, in fact, committed by occasional
thieves not prepared to face obstacles and accidents. Aluminum
and steel rolling shutters have functions of dissuasion and
put up an optimal resistance against force attempts. Moreover,
Croci offers a large range of accessories which can be installed
in different points of the rolling shutter, to avoid lifting
and/or unhinging from the guide rails, which increases the
security against thefts
Locking systems for end slats
Intermediate locking
systems
Automatic locking systems
|
| Locking systems for
end slats |
| END
SLATS LOCKING SYSTEMS |
ALUMINUM
OR STEEL SECURITY LATCH
Composed of a specially formed aluminum or steel bar and by
a PVC anti-slide handle.
Fixed on end slats TE7X56 and TE14X56 (except universal type)
without any further workings, due to the particular form of
the end slat; manually operated and introduced into the wall
and lateral guide rails, avoids bottom lifting of the rolling
shutter. Also available in versions for intermediate profiles
(suggested for profiles TE12X55 and ES/37) |
 |
REINFORCED
STEEL SECURITY LATCH
Composed of a steel bar and a locking handle, fixed on the
end slat 14X56 (standard - inversion - universal) specially
worked. Manually operated and introduced into the wall and
lateral guide rails, avoids bottom lifting of the rolling
shutter |
 |
KEY LOCK
Interior or interior/exterior manual operated key lock, fixed
on the end slat 14x56 (except universal type) with two lateral
aluminum bars and introduced into the wall and lateral guide
rails, avoids bottom lifting of the rolling shutter |
 |
|
|
|
|
